Technical Specification of Injectable Powder Filling with Rubber Stoppering Machine 120vpm Model-PIPF-120:
|Output/Hour*||Up to 120 Fills / Min for Single Dose.
Upto 60 Fills / Min for Double Dose.
Upto 40 Fills / Min for Triple Dose.
Upto 30 Fills / Min for Four Dose.
|Fill Size***||50 mg to 1.5 grms. Single Dose ( with Change Parts)
1.5 grms to 6 grms. Double, Triple and Four Dose.
|Fill range depending upon vial opening and bulk density of powder. Under controlled level of Humidity
|Accuracy||±1% depending upon consistency and uniformity of bulk density of injectable powder|
|Electrical Specifications**||Main Machine and Conveyor||1 HP / 415Volts / 50 Hz.|
|0.5 hp x 2 , 415 volts , 50 HZ|
|Magnetic coil||300 watt. 2 amp.|
|Vacuum Pump||3 HP / 415Volts / 50 Hz.|
|Pneumatic Air||Filtered, oil free, sterile low pressure Air at 2 kg/cm2(2/3 bar)|
|Vacuum Line||20 HG|
|Height of conveyor.||800 to 850 mm adjustable.|
|Machine Dimensions**||3000mm (L) x 1050 mm (W) x 1900 mm (H)|
|Case Dimensions||3200mm (L) x 1250 mm (W) x 2100 mm (H)|
|Net Weight||850 kgs|
|Gross Weight||1200 kgs|
* Depends on Vial size.
** We can supply as per customer requirements.
*** With help of change parts.
- No Vial – No Fill System
- All contact parts made of SS316 material with easy removal system for Autoclaving/Sterilization
- Machine constructions in SS304 material
- Separate Variable Speed Drive for Powder Hopper
- No Crossover Contamination during Charging of Powder due to new Design of Powder Hopper
- Hopper can be completely dismental for easy cleaning
- Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
- Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
- Tool Less change over for Powder Hopper and Well Agitator
- Filling Accuracy of +/- 1% depending on powder at controlled humidity below 30% Rh
- Built in Rubber Stoppering System
- Multiple dosing system with the help of change parts
- Built in Turn Tables with Separate Drive for speed control of in feed and out feed of vials
- Various safety features including Clutch system for Vial Breackage
- Machine Bottom with all over minimum clearance of 6” Height
- Moving conveyor above the top plate maintaining proper gap for meeting current
- Automatic Infeed and Exit of Vials
- Powder Hopper for charging with better position and design without crossing the line.
- No Stopper – Machine Stop System
- Low Air – Machine Stop System
- Low Vacuum – Machine Stop System
- Heavy Duty Mounting system for Powder Wheel for Trouble Free long term opreation
|Electrical supply||3 Phase + Neutral + Earthing|
|Electrical load||5 HP. 3.75 KW|
|Air Pressure: Minimum||2/3 bar pressure 2 kg/cm2|