Automatic Auger type Powder Filling Machine

Automatic Auger type Powder filling machine is precision built on sturdy welded MS frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of machine. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body.

Operation of Automatic Auger type Powder Filling Machine

The dried, sterilized bottles are fed through the infeed Turn Table on the infeed SS/Delrin conveyor belt at the required speed for feeding. There are two Filling Heads and hence bottle reaches under the first filling head, it is held by the pneumatic bottle holder. Immediately it is be sensed by the bottle sensor and gives signals to magnetic clutch/servo motor to start to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is set in the Timer/PLC. After filling of first bottle pneumatic bottle holder releases the first bottle to move on conveyor. At the same time second bottle also moves along with the first bottle in empty condition. In the second filling head same operation is performed but this second bottle gets filled and first bottle moves further for next operation.

Technical Specification of Automatic Auger type Powder Filling Machine

Model	PAPF-80	PAPF-120
Output/Hour*	2000-4800 containers	7200 containers
Number of Head	2 Nos.	4 Nos
Fill Size***	5 Gms to 500 Gms
Servo motor	750 watt each
Electric Specification**	Main Motor	1.50 HP / 415Volts / 50 Hz.
Electric Specification**	Conveyor	0.25 HP / 415 Volts / 50 Hz.
Machine Dimensions**	2000 mm (L) x 1100 mm (W) x 1700 mm (H)
Case Dimensions	2200 mm (L) x 1300 mm (W) x 1900 mm (H)
Net Weight	500 Kgs.
Gross Weight	700 Kgs.
Change parts requiredt	((a) Auger (b) Funnel

Automatic Auger type Powder Filling Machine Input Specifications:

ROPP Cap Specification	Diameter**	19 mm to 38 mm***
ROPP Cap Specification	Height**	15 to 18.3 mm
Container Size**	Round Shape	Ø 22 mm to Ø 80 mm* Respectively Height 58 mm to 240 mm* (Height option for other bottle height available.)
Container Size**	Flat / Square	15mm to 100 mm (Length)* Respectively 10mm to 50 mm (Width)* Respectively Height 58 mm X 240 mm*** (Height option for other bottle height available.)

Note: * Depends on bottle size, cap size and type of cap.
** We can supply as per customer requirements.
*** With help of change parts.

Automatic Auger type Powder Filling Machine Input Specifications:

Container Neck Diameter**	Minimum 22 mm***
Container Size**	Round Shape	Ø 28 mm to Ø 100 mm Respectively height 58 mm to 240 mm (Height option for other bottle height available)
Container Size**	Flat / Square	15mm to 100 mm (Length)* Respectively 10mm to 50 mm (Width)* Respectively Height 58 mm X 240 mm*** (Height option for other bottle height available.)

Note: * Depends on Container size, fill size, Neck diameter of container, and nature of liquid etc
** We can supply as per customer requirements.
*** With help of change parts.

Salient Features of Automatic Auger type Powder Filling Machine

Automatic with filling range from 5 Gms to 500 Gms
No container no fill system
Accuracy ± 3 % in single doze.
Body covered with hairline pre-finished SS304 sheet.
All contact parts SS 316.
A unit to fill variety of fine and granulated powder and can be used for various type of containers.
Minimum change over time of change parts

Automatic Auger type Powder Filling Machine Option Features

Polycarbonate cabinet.
Powder level sensor.
Safety guards for all doors, motor & conveyor

Automatic Auger type Powder Filling Machine Utility Requirement:

Electrical supply	3 Phase + Neutral + Earthing
Electrical load	2.30 KW