Automatic Rotary Ampoule Washing Machine

Automatic Rotary Ampoule & Screw Capping Machine cGMP Model

The Ampoule rotary washing machine is designed to wash both internal and external surfaces of Ampoule at a rated speed of 120/300 per minute for 2ml to 100 ml Ampoule.

Automatic Rotary Ampoule Washing Machine Process

A. Infeed system

Ampoule s are directly fed into infeed hopper.
Hopper can accommodate 300mm width tray size.
From infeed hopper, Ampoule s are transferred to a feed screw through conveyor.
Ampoule s are then singled out using a feed screw.
Ampoule s are fed into the infeed star wheel through feed screw.
Ampoule s are then delivered to a revolving conveying system consisting of “V”-grippers.
A gripper engages individual positioned Ampoule s at their necks.
The Ampoule s are subsequently inverted to 180 degrees by a cam before the washing process starts.

B. Washing section

Inverted (upside down) Ampoule s are processed through various washing cycles.
The rotating drum on which grippers are mounted move at a uniform speed. Depending upon the washing cycle, the cleaning media is jetted intermittently on to the Ampoule s.
At the individual stations, spray needles travel in synchronism with Ampoule s and enter the Ampoule s with orifices exactly centered.
The spray needles follow the continuously moving grippers from the start to the finish of a working station and then retract.

C. Outfeed System

After washing cycle, the washed Ampoule s are re-inverted to their original position and then transferred on to the outfeed star wheel and carried by feed screw to the down line tunnel in a single line

Automatic Rotary Ampoule Washing Machine Washing Process

Station.1: Spraying with re-circulated WFI ( external Continuous and internal pulsed)

Station 2: Blow-dry with compressed air (internal pulsed)

Station 3: Spraying with purified water (internal pulsed)

Station 4:Blow-dry with compressed air (internal pulsed)

Station 5: Spraying with WFI (internal pulsed)

Station 6: Blow-dry with compressed air (internal pulsed and external continuous)

Technical Specification of Automatic Rotary Ampoule Washing Machine

Model	PAFS-120	PAFS-300
Optimum Output (Ampoule/min)	120	300
Number of Head	6	8
Overall dimensions	3200mm (L) x 2000 mm (W) x 1400mm (H)
Electric Power Supply	230V. 1 Phase 1 H.P
Ampoule Size	Min. 9.5mm Dia. to Maxi. 17.5mm Dia. (1ml to 10ml Ampoule)
Change Parts	Feedworm & Starwheel Backguide set
Ampoule Collection	Collect in Trays/Conveyor

Automatic Rotary Ampoule Washing Machine Input Specifications:

Ampoule Diameter	Dia. 10.75 to 22.50 mm
Ampoule Height	60mm to 113 mm

Salient Features of Automatic Rotary Ampoule Washing Machine

PARTH make Washing Machines designed to clean the inner & outer surface of Ampoule .
Continuous rotary travel system.
Machine divided into 3 basic sections – Mechanical drive / Washing section / Filtration section, suitably isolated / separated from each other.
Facility to feed Ampoule from infeed worm screw.
Ampoule s are held in inverted position through the washing & cleaning stage.
At the individual stations, spray tubes travel in synchronism with Ampoule and enters the Ampoule with orifices exactly centered. The spray tubes follow the continuously moving grippers from the start to the finish of a working station and retract. /li>
Standard provision for media jetting at six stations. Filtration Unit housed in a separate section / machine mounted.
Easy to changeover of change parts.

Automatic Rotary Ampoule Washing Machine Utility Requirement:

ower Consumption & Supply	7 kW, 3-Phase, 240/415V 50 Hz
Purified Water consumption	150 lit/hr. at 2.5-3 kg/cm2
Compressed air consumption	15m3/hr. at 3-4 kg/cm2
WFI consumption	100 lit/hr. at 2.5-3 kg/cm2